Tips For Kitchen Cabinet Refinishing

Whether you’re looking to update your cabinets with a new color or you want to give your old cabinets a new look, refinishing your cabinets can be a great way to make your kitchen look new again. It can also save you time and money.

A refinishing job will cost about $4 to $10 per square foot. The cost depends on the type of cabinet you have and the type of finish you choose. The following are some basic steps to get your cabinets refinished:

Prep the cabinets: Make sure the cabinet is in good shape before you start. Remove any dirt and moisture that may have built up on the surface. It’s also important to sand away old paint from the cabinet doors. Then you can apply a new color. You’ll need a sander and 120 grit paper. This process creates a surface profile for the primer. If you’re using a brush coat finish, you can use a mini-roller system to achieve a smooth surface.

Use a protective coating: You’ll need to protect your cabinet from dust and other contaminants. Using a respirator mask and gloves is recommended. You also want to use a non-yellowing sealant. The paint will need to be applied slowly and evenly to prevent peeling.

Choose a quality primer: You want to find a primer that’s designed to bond with the surface of the cabinet. You may also want to use an adhesion promoting primer. It’s especially important to use a primer if the surface has a lot of slickness to it. If you’re refinishing laminate cabinets, you’ll need to use a special adhesion promoting primer.

Choosing the right paint: The type of paint you use will determine how long the cabinet refinishing will last. You should always use a good quality paint to ensure that the finish will last. It will also minimize any minor surface damages. It’s important to choose a paint that is semi-gloss or gloss so that it can be cleaned easily.

Choosing the right type of finish: When you’re refinishing your cabinets, you have a lot of options. If you want to give your cabinets a modern European look, you may want to consider a stain. If you want a lower level of surface protection, you can opt for a transparent stain. This will allow the wood grain to show through, but it will not change the color of the cabinets. You can also choose a solid stain, which will offer the highest level of protection.

Choose a glaze: If you want a dramatic look, you can use a glaze. You can add a glaze to the door, crevices, or even the entire cabinet. When you’re done, wipe away the excess glaze. You’ll also want to wipe the surface in one direction, rather than dragging the glaze along the surface.

A professional cabinet refinisher uses special finishing materials to give your cabinets the look of new. They know how to separate parts and put them back together so that everything looks like new. So make sure you hire a professional from best handyman company in St. Petersburg, FL.